How to Migrate a WordPress site to Azure Using In-App MySQL

Did this site load a little faster than it normally does? You may not have a basis of comparison, but I have noticed that pages load between 2x and 5x faster since I moved the site to Azure hosted WordPress using an In-App MySQL database. Previously I was running it on Azure as well, but it was using the 3rd party ClearDB database server. The performance increase is therefore entirely due to the difference in the database engines.

I have been running this blog as a web app on Azure for the last couple of years, ever since it became available. In fact, I wrote about how to enable hosting for multiple users on the same database when I first set it up. At the time, setting up a WordPress web app involved also provisioning a MySQL database through a third-party hosting provider, Clear DB. The initial offering was free, but as I quickly found out, the initial offering also doesn’t provide much, and I needed to upgrade it through the third party. This arrangement was fraught with difficulty. Aside from the unwelcome additional costs, managing the billing cycle was difficult. In addition, all my WordPress sites were a little to a lot sluggish, and increasing Azure resources didn’t seem to help much.

Over time, I learned that I wasn’t the only one, and the performance problems seemed to be with latency between Azure and the third-party provider. However, I didn’t want to start messing around with standing up my own, and it was usable if a tad expensive. However, a month or so ago I was listening to my friends Andrew Connell and Chris Johnson on the Microsoft Cloud Show, and they mentioned that Azure had put out a preview of a native MySQL implementation. This was of course music to my ears, so I tried it out, and it appears to work quite well.

I have since moved all our WordPress properties over to this new architecture, and documented the procedure. The approach that I tool should work for any WordPress site, whether it is hosted on Azure or not, but the examples I use will of course be going from Azure to Azure. I essentially create a new WordPress site, migrate the site assets to it, configure the new site to match the old one, then point the address to the new web app. There are quite likely third party add-ons that facilitate this process, but this process is manual. I am in no way saying that this approach is a best practice, only that it worked for me. Finally, as noted above, the In-App MySQL is in Preview, not production, so if your WordPress site is critical, it would likely be a good idea to hang on for a bit. I however like to live dangerously, and if my blog goes offline for a few hours, it’s not the end of the world.

Here are the steps required to accomplish this.

1. Upgrade the existing site

The new site that will be created will use the latest version of WordPress, and any plugins that get installed will also be the most recent. To avoid any version mismatches, it’s a good idea to make sure that your WordPress version, and all your plugins are up to date.

2. Retrieve the WordPress Assets from the existing Site

You can use the built-in export feature in WordPress to retrieve all the database assets. Open the tools section, select “Export”, and choose “All Content”.

Azure

The types of content will vary depending on your WordPress installation, plugins, etc., but make sure that you select all of them. When ready, select “Download Export File”. You’ll get prompted to download an XML file – put it somewhere safe – you’ll need it later.

Next up, you’ll want to retrieve your file system based assets. These will be all your uploaded files, unless you currently use and externally hosted provider, your WordPress themes, and your plugins. Strictly speaking, this step isn’t necessary. You should be able to re-download your themes and plugins, but I have found that they aren’t always available, and that this process is faster. However, if you don’t have access to the file system of the existing site, you may not be able to do this. The upload files can be gathered through the import process later as well, but this approach provides an added level of safety.

For Azure, you’ll use FTP to connect to the file system and copy the files locally. For Azure hosted sites, you can set the FTP credentials by logging into the “new” Azure portal, selecting the web app for your site, then navigating to “Deployment Credentials”. You then enter a user name and a password, and save them.

Azure

Next, scroll down to “Properties” for the web app, and take note of the “FTP Host Name” and the “FTP/Deployment user”. You will use these values to connect to the file system.

Azure

Now open Explorer on a Windows PC, right click in the “This PC” node, and select “Add a network location”.

Azure

Follow the prompts entering the FTP host and the user name when prompted. Do not attempt to log in anonymously. Also, take note – the user name has the form web app name\username. When the node opens, enter the password, and you should see 4 folders. Open “site”, then “wwwroot”, and finally “wp-content”. The folders that you need are here.

Azure

Specifically, you are looking for the plugins, themes and uploads folders. Copy these folders locally and keep them handy.

3. Create the new WordPress Site

From the Azure admin portal, select “Create New”, and search for “WordPress”. There are several WordPress options to choose from, but the one we’re pursuing is published by WordPress.

Azure

Once selected, you will be prompted to fill out the details. Give the new app a name, select the Resource Group, and most importantly, the Database Provider. ClearDB is the one that we are moving away from, so “MySQL In App” is the one that we want to select.

Azure

Once you click OK, the App will be created, and WordPress will be deployed to it. The App creation happens almost immediately, but it takes a few minutes for WordPress to be fully deployed. Don’t be alarmed if there’s nothing there for a little while.

Once deployment is complete, you can simply click on the URL of the app in the “Overview” section. The URL will take the form of http://webappname.azurewebsites.net.

Azure

A browser will open and you will be prompted to complete the initial WordPress installation. One that complete, you will be able to login to the WordPress administration portal.

4. Upload the Older Assets to the new WordPress Site

The next thing that we want to do is to upload the assets that we downloaded in step #2 to the new site. To do this, simply connect to the new file system via FTP by following the same steps that were used to connect to the old site in step #2. Once connected, upload the 3 folders to the wp-content folder of the new site. If there are folders that already exist, or that you don’t want to use in the new site, simply omit them from the upload. Once uploaded, we can activate the features.

5. Activate Assets in the New Site

It is important to activate and configure the plugins before the content from the existing site is imported. This is because some plugins extend the schema of the WordPress database, and any content that depends on those schema extensions will fail to import if they are not present.

Login to the administrative portal in the new site, and activate all the required plugins. If you don’t know which plugins should be activate, simply login to the administrative portal of the old site for reference. It’s a good idea to have these portals open side by side as you complete the next few actions. Once the plugins are active, go to the appearance section, and select the same theme as the original. Once the theme is selected, it needs to be configured. Walk through all the configuration options for your theme matching with the original site. Any options that depends on content will need to be set after the content is imported. Once the theme is configured, the plugins should all be configured. This is a very manual process of going through all the configuration screens and comparing the settings to those of the existing site.

Finally, recreate all necessary users from the old system. You will need to match blog posts with authors during the import step. The import step will offer another opportunity to add new users, but it’s a good idea to do this prior so that complete information is added for each user.

6. Imports Content from the Existing System

From the administration portal of the new WordPress site, navigate to the Tools section, and select import. A number of options will be presented, the option that you’re interested in is “WordPress”. If you don’t already have the WordPress Import Plugin, you’ll need to select “Install Now” and allow the plugin to install and activate. Once activated, select “Run Importer”, and the Import dialog will appear. Select the export file that was downloaded in Step #2 above, and then click the “Upload file and import” button to see the Import WordPress dialog.

Azure

WordPress Import is author aware, and will automatically assign posts to users that exist in the new environment based on who they were in the old, you simply need to map them at this point. If you forgot to add a user in Step #5, you can do so here as well. Once authorship is assigned, the only other decision is whether to select the “Download and import file attachments”. Strictly speaking, if all assets were brought across in step #2, this shouldn’t be necessary. What this option does is to download all referenced assets from the existing blog during the import process. This doesn’t always work, particularly on larger blogs, which is why step #2 is so important.

In addition, if the content of the site results in a particularly large export file (as was the case with this one), you’ll need to increase the upload limit for your WordPress site. This can be done by creating a “.user.ini” file in the root of your WordPress installation as described here. Additionally, you may also need to increase some of the application timeout values.

7. Test

Test the new site to ensure that it works. This cannot be stressed enough. Open all the sections to ensure that everything looks right. Ideally, use browser windows open side by side with the new and the existing sites

8. Make URL Changes to the Existing WordPress Site

It is important to follow these steps to avoid being locked out of the existing site. There are ways to correct it if it happens, but the situation is beast avoided.

Open the administration portal of the existing site, and navigate to “Settings”, General. If the WordPress Address (URL) and the “Site Address (URL)” values do not match the default URL for the Azure Web App, they will need to be changed to that value here.

Azure

The address will take the form http://azurewebappname.azurewebsites.net. It’s also a good idea to navigate to that URL to ensure that it works before saving.

8. Make URL Changes to Azure

If your existing site isn’t running on the default Azure address, you’ll need to repoint it to the new site. This will cause your site to be unavailable for a few moments. To begin, you need to remove your custom domain from the existing (now “old”) site. Navigate to the Web App for the old site in the Azure portal, and select “Custom domains”. Your custom domain should appear there along with the default address (that was used in step 8).

Azure

Click on the ellipsis beside the domain, and select “Unassign”. This will remove the custom address from the old site, freeing it up to be used by the new site.

At this point, you will need to make changes to your domain with your domain registrar. You will need to change any references (A records and/or CNAME records) that you currently have for your custom address to point to the new Azure Web App. Details for those settings can be found under “Custom domains” for your new Azure Web App. Once complete, navigate to “Custom domains” in the new Web App and click on the “+” button beside “Add hostname”. Enter your custom address and the click the “Validate” button. The custom address will be tested, and if there are any issues with it, remediation steps will be provided. The Azure portal is quite good at helping to manage this step.

Once the new URL has been registered, it should be tested to ensure that it is accessible from the outside environment. Prior to testing, the old site should be stopped (but not deleted!) to ensure that it is not responding to any requests.

If SSL was used on the old site, at this point they should be brought in to the new Web App and bound to the site.

9. Make URL Changes to the New WordPress Site

If the custom domain is working, follow the steps in step 7, but on the new WordPress site, and use the custom address for the URL values. Save, and login again.

10. Final Testing

At this point the site is live, but it is worthwhile to do another round of testing with the old Web App in a stopped state. This will identify any URLs hardcoded with the old Web App default URL, and missing assets, etc.

At this point, the new WordPress site is set up and working with the In-App MySQL database. I would recommend waiting a week or so before going back and deleting the old site and its assets, just in case.

8 thoughts on “How to Migrate a WordPress site to Azure Using In-App MySQL

  1. Geert Linthoudt

    Hi,

    I just read your post about “How to Migrate a WordPress site to Azure Using In-App MySQL”.

    I found it because I have a problem with my website: “Error establishing a database connection” and I was looking for an answer.

    Using In-App MySQL I have no idea how to solve this problem, I also can’t get to my correct username and password or hostname (I don’t know how).

    Can you help me out because at the moment my site seems to be dead and not recoverable.

    Thanks

  2. John White Post author

    Hey Geert

    The name and password issue is a bigger one – the password is never actually stored anywhere, a hash of it is. If you’ve lost the WordPress password itself, you’ll need to get down into the table level and do some exporting and imports.

    As for how to do that, have you tried the Kudu interface? You can access it from your Web App as “advanced tools” or use the URL http://webappname.scm.azurewebsites.net. From KUDU, you can run console commands, including those included with MySQL. You can get to any of the files that comprise the Web App, including the MySQL tables.

    Good luck!

  3. John White Post author

    I spoke too soon. Some of my sites had experienced the same error this morning. It was caused by a service refresh (this is a preview feature). I contacted support, and received the fix. What you need to do is to:

    1. Log into the Azure Portal
    2. Select App Services, your application, and then “Application Settings”
    3. Scroll your rightmost pane down to “App Settings”
    4. Add the following Keyword and value:
    KEY: WEBSITE_MYSQL_ARGUMENTS
    VALUE: –default_password_lifetime=0
    NOTE – The VALUE above begins with two dashes. For whatever reason, WordPress converts the two to one when you read it.
    5. Check the “Slot setting” checkbox.
    6. Save from the top of the pane, ad then restart the app.

    All should be well.

    I must say, support got back to me within a half hour on basic support, and this is currently a preview feature. I was seriously impressed!

  4. John White Post author

    Thanks – two dashes certainly. They are there when the comment is edited, but WordPress converts them to one. Odd.

    In any event – the problem on the Azure side has now been fixed, and that setting is no longer required. You can feel free to remove it.

  5. Björn Peters

    Hi John,

    I’ve just read you blog post and just thought ” ok, give it a try”.
    But for me as a private blogger (actually) without a sponsor show pays my webhosting “WordPress on Azure” is not an option. Actually I’m paying about a 1/10 of the prefered Azure Server Size. If I would decide to move my blog onto a faster solution e.g. there is a big German webhosting company with a special wordpress offer. There I’ll get Webspace on SSD, Databases on SSD, a CDN, domains included for a 1/5 of the price the prefered Azure Server Size.
    So for me as a single private blogger with only one blog it is “not payable”, but I understand if you’re having several blog-sites and doing it for a company/sponsor…

    Otherwise many thanks to you for sharing your experience and knowledge with us !!!

  6. John White Post author

    Hi Björn

    On the surface – you’re right about the cost. However, unless something has changed, Azure subscriptions give you a monthly credit of $160 toward service use. A web app of the size that you likely need wouldn’t hit that limit. You might want to give it a shot.

  7. Tom Resing

    Hi John,
    Thanks for writing up the experience with this new preview feature. I had been running my blog on Azure with ClearDB and experienced the same issues. Like Bjorn, I moved to a dedicated WordPress host and am happier there for now. It’s nice to know that improved MySQL support is in preview. Sounds like it will be a big boost for WordPress hosting on Azure. By the way, I don’t think everyone gets monthly credits in Azure. Perhaps you have it through an MVP benefit or MS Partner benefit.
    Tom

Leave a Reply

Your email address will not be published.