How to Manually Migrate from BPOS to Office 365

UPDATE – 13/10/2011 – Before walking through the steps described below, please read all of the comments, particularly the guidance from Microsoft Online Services.

Unless you’ve been living under a rock, you’ve heard about Microsoft Office 365, which is Microsoft’s bundled offering of online versions of Exchange, SharePoint, Lync, and Office. In case you’re unaware, Lync is what was formerly known as Office Communication Server, combined with LiveMeeting.

The product packs quite a punch, and if you haven’t already, I would urge you to check it out, particularly if you’re a small business. The value proposition is extraordinary, and you can get out of the business of managing your infrastructure, and focus on your core business. What’s even more compelling is that if you can’t or don’t wish to move completely to cloud based services, you can still move those pieces that make sense (to me, email is a no brainer), and work in a hybrid model. Microsoft is the only online vendor that I’m aware of that can offer this hybrid approach.

As a relatively small company, we have been using hosted email for over a year now, in the form of BPOS, which is the previous version of Microsoft’s online offerings. As a partner, we’re very interested in moving to Office 365 as soon as possible, but the migration plan for current BPOS customers won’t begin until some time after the final release of Office 365. Given the compelling features in Office 365, we didn’t want to wait, so we figured out a way to migrate manually.

Now, by migrate, I’m referring explicitly to email. This article does not cover the migration of SharePoint content, but given that we didn’t have much content in SharePoint Online, this wasn’t going to be a problem for us. Also, because the two services are using two different identity types, you can migrate your email now, and let the content get migrated later.

The secret to the manual migration is Outlook. Since Outlook 2010 can connect to multiple Exchange servers, it becomes the intermediary. This approach is very likely not suitable to large environments, and your mileage may vary, but it did work well for us.

1. Set up your Office 365 Account

No matter what domain you actually used with BPOS, there’s an underlying domain that you got when you signed up, that took the form yourdomain.microsoftonline.com and all users that you create can receive mail addressed to username@yourdomain.microsoftonline.com, no matter what domain that they are assigned to. Office 365 follows the same principle, except that the form of the domain is yourdomain.onmicrosoft.com. All users that will be migrating need to be created in the new Office 365 domain.

2. Login to the New Account

Normally, when a new account is set up in Office 365, the user is given a temparary password. This password is only good for logging into the main Office 365 portal and setting the users password – it won’t work for anything else, like Outlook access. Therefore, it will be necessary for you to log into https://portal.microsoftonline.com to set the account password before continuing. (Note, don’t be confused by the domain – portal.microsoftonline.com is the hub for Office 365 – the equivalent in BPOS is home.microsoftonline.com)

3. Connect Outlook to Office 365

You don’t need the client integration tools to connect Outlook to Office 365, which is good, because at this point, we’re not ready to install them. We simply need to connect Outlook to the new server. First, from Outlook, click File – Add Account

image

Next, fill in your account information. Name, email, and password are all that you should need, but make sure that you use the right email address, xxx@yourdomain.onmicrosoft.com.

image

After you click next, you’ll be prompted for credentials – these are the credentials for the new account (xxx@yourdomain.onmicrosoft.com), and you’ll enter the password from step 2 above. Outlook will then configure the account, and you should receive a success message. Once you do, click finish.

In order to continue, you’ll need to close, and restart Outlook. On restart, Outlook may prompt for the new profile, and after that, it will prompt for the credentials again. It does this because single sign on is not yet enabled for the new account. That will come later. Once credentials are given, Outlook will take a minute and set up the new mailbox. Once that’s complete, we’re ready to move on.

4. Move Mail Messages

When you start Outlook, you should now see at least 2 accounts in the folder pane, the BPOS account, and the new Office 365 account. Drag one of your folders from the BPOS account to the Office 365 node.

image

Repeat this process for all of your folders. When complete, open your inbox, select all if your messages (or all of the ones that you wish to migrate) and drag them to the inbox of the new account. This may take a few minutes, depending on the size of your inbox. Once done, repeat this for your sent items folder.

What happens is that the messages are moved locally on your system from the local cache of your BPOS account, to the local cache of your new Office 365 account. Then once that is complete, you can continue to use outlook as the accounts are synchronized in the background. This can take a significant amount of time, likely several hours depending on the size of your mail file, so plan accordingly. While synchronization is in process, the status bar will tell you, as you can see below.

image

5. Move your Calendar Entries

Calendar entries are a little bit trickier, because there’s no obvious way to select all calendar entries. In addition, the folder browser goes away when you select your calendar. It is however completely possible.

First, select calendar, and ensure that your BPOS calendar is the only one selected. Then, select the View tab, Click the Change View Button, and select List. This will present you with a list view of your calendar entries.

image

From the list view, simply drag all of the entries that you wish to migrate to the Office 365 calendar in the calendar pane.

6. Move Contacts, Tasks, and Notes

For each of Contacts, Tasks, and Notes, firs click on their heading, ensure that the BPOS account is selected, and drag them to their equivalent Office 365 account section.

7. Repeat As Necessary

Repeat steps 1-6 for all of the accounts that you wish to migrate. I know, I never said this approach would scale, but it works for us…..

This manual copy process can be carried out over a period of time. During this time, new mail will continue to be delivered to the BPOS account, so it will need to be manually moved again once the delivery changes, which is the next step.

8. Make DNS and Administrative Changes

As long as a domain is assigned to BPOS, you cannot assign it to Office 365. That’s why the user accounts on Office 365 have so far looked like yourdomain.onmicrosoft.com. Once the bulk of the mail has been moved, we are ready to decommission the domain from BPOS, and to assign it to Office 365.

Once complete, all new mail will be delivered to Office 365. However, because DNS changes are not instant, there may be a period of time where mail cannot be delivered. Mail may also continue to be delivered to the BPOS accounts for a period of time, which will work because BPOS only cares about the name portion of the email address. It is a good idea to perform this step during off-peak times.

In our experience, the BPOS had a little trouble letting go of the domain, and this led to delivery failures for the better part of a day. Try to do this during a period of low traffic, and don’t plan anything for the following day.

EDIT – JULY 2011

WARNING

It appears that the glitches that happen at this point are more systematic that I had originally thought. The Forefront that is used by Microsoft Online will hang on to your domain until explicitly cleared. You will need to contact either Office 365 or BPOS support to get your domain flushed out. You will also need to de-associate your Office 365 users from your domain, so that you can also remove it from Office 365 and set it up again. You will have no mail for this period. In our case, this lasted for one day, but we were discovering the problem at the time. You should also note that the support staff that can make the required Forefront changes only work regular business hours, North American Central time, so plan accordingly.

If the domain gets stuck in Forefront, you will be able to send receive mail from within online services, send mail outside, but outside mail coming in will receive a relay error.

A) De-Associate All users from the main domain

You can’t remove a BPOS domain that is in use, so you will need to change the default domain for all users using it. You can replace it with any of your configured domains, but I would suggest re-adding them to the default domain,, which in the case of BPOS is yourdomain.microsoftonline.com.

This is done from the BPOS admin console, admin.microsoftonline.com. Select Users, User List, and click on the the user that needs to be changed. from the edit user screen, simply change the Domain setting.

If one of the users that you’ll be changing is yourself, you’ll need to login with a different account that has administrative privileges. You can’t edit the domain setting of the user that is currently logged in.

image

B) Remove the domain from BPOS

Once all of the users have been de-associated, you can remove the domain. From the BPOS admin console, select Users, Domains. Select the domains that you wish to remove, and click the Delete button.

image

If the domain that you are removing is the default for your BPOS account, you’ll need to change the default first. You can’t remove the default domain.

C) Remove BPOS entries from your DNS records

In all likelihood, you’ll have 3 DNS records that are associated with your BPOS account. AN MX record for mail, a CNAME record for domain validation, and a CNAME record for autodiscovery. These records should be removed before proceeding.

D) Assign the domain to Office 365

From the Office 365 admin console, you can now add your domain to Office 365. Under management, click on Domains, and then Add A Domain. Follow the domain addition wizard. The first thing that you will need to do is to add a CNAME record to your DNS for validation purposes. Once that is complete, you will be routed to a page where you are instructed to make the rest of the changes to your DNS records.

image

Most of the records are fairly self explanatory. However, the server records can be tricky. I would caution you to stick to the recommended TTL values though. Our DNS provider (DynDNS.com) has a rather open ended approach to SRV records, and it was not immediately obvious as to how to construct the records for Lync, given the instructions in Office 365.

LyncIssue

Searching around a little, and hacking a lot, I finally came across a combination of values that work. I include them here in case anyone else runs across the same issue. Based on the entry form above, the values that I used were:

Host TTL Type Data
_sip._tls 60 SRV 1 100 443 sipdir.online.lync.com.
_sipfederationtls._tcp 60 SRV 1 100 5061 sipfed.online.lync.com.

 

E) Associate your users with the new domain

At this point, you should use the user management tool in Office 365 to set the users’ domain to the one just set up, much like you did when de-associating the users. Again, as with BPOS, you can’t change the domain property of the current logged in user, so it’s a good idea to create a generic admin account for this purpose.

If the DNS gods have been smiling, and you’re lucky, and it’s the right day of the week, email will be flowing. In reality, it’ll be a while before you can receive mail, but you should be able to send right away. In any event, you’re ready to reconfigure the users’ workstations.

9. Uninstall BPOS Components from User Machines

You’ll likely have at least one, and as many as 3 applications installed from BPOS. There’s the Single Sign on Client (pictured below), Office Communicator 2007, and Live Meeting 2007. It’s a good idea to uninstall all three from the client workstations.

image

10. Install the Office 365 Client Software

When the user logs into the Office 365 portal using their new ID (xxx@yourdomain.com), they’ll see a Download link on the right side of the screen. From there, they’ll need to perform steps 2 and 3, Install Lync, and then configure the desktop. If they don’t already have Office 2010 installed, that should be done first. The desktop configuration tool sets up all of the desktop applications with the exception of Outlook.

11. Create New Outlook Profile

You could set up the new mailbox a number of ways, but given that the new account name will likely be the same as the old account name, I prefer to create a new mail profile for Outlook, set it as default, and configure it from scratch.

To do so, you’ll need to make sure that Outlook is not running, and then open up control panel. Within control panel, you’ll find an icon for Mail (32 bit). Open it.

image

You’ll first need to click on Show Profiles, and then the Add button, to create a new profile. You can name it whatever you like, but be sure to select it as the default profile for Outlook.

image

Then click OK. The control will close, so you’ll need to open it again. Once you do, click on the “Email Accounts” button, and configure the Office 365 account as described in the Office 365 documentation.

You’ll need to repeat steps 9 to 11 for all users that you need to migrate.

As I mentioned above, this a a pretty labour intensive way to accomplish a migration, but it does get you from A to B, and you can start using the features that make Office 365 so compelling. Given that UnlimitedViz is a partner, we really couldn’t afford to wait, and in the end, I’m really glad that we didn’t…

Advertisements

A Conversation in the Cloud

I recently participated in an online webcast panel discussion on the impact of cloud computing on IT. This has just been posted as an on demand webcast, and if you’re interested, you can watch it here.

On the surface, cloud computing would seem a threat if you’re involved in infrastructure. However, my take on this is that it’s an opportunity for IT folks to focus less on “plumbing” related things, and more on things that will drive true business value, making themselves that much more important to the organization. The reality is that IT services are constantly being commoditized. Networking used to be a big deal, and now it’s taken for granted. Ray Noorda (the founder of Novell) once said “where there’s mystery, there’s margin”. It’s too bad that his company didn’t keep chasing the mysterious – they were recently acquired by Attachmate.

Cloud computing is coming to your business, in one form or another. At the very least, if you’re in IT, you want to figure out how you’re going to deal with it. You can get on the bus,get out of the way,but if you just stand there like a deer in the headlights, you’ll get run over.

The Cloud Computing Landscape

Last night I delivered a talk to the Waterloo Wellington IT Pro (WWITPro) Users Group at our office in Kitchener Ont. on cloud computing. My aim was to walk through a little bit of the why, what and where of cloud computing, with an emphasis on the consumer space. The slide deck for the talk is available here. There was a fair bit of time spent in demos,  but the deck does contain a link summary to many of the current cloud computing offerings available. You may find it useful.

Bye Bye Blackberry

It’s old news by now, but I didn’t want to write about this until I had a little usage under my belt. I’ve also been too busy to write, I have about 5 other posts queued up that I just need to get to, but I wanted to document my experience with my new Windows Phone 7.

In a nutshell, I absolutely love it. I couldn’t imagine going back.

I’ve been a Blackberry user since around 1996 with the original RIM 950. For years Blackberry was not only an innovator in mobile messaging, but their devices were rock solid. I don’t know how much abuse my Blackberries took over the years, including being dropped in water (yes that kind of water), dropped kicked, whatever. After a fall that cracked its window, my 8800 kept on ticking. The Blackberry was also top notch for message delivery through it’s BES for years. Other contenders came on the scene, but I always felt that all I wanted in a mobile device was email.

If you’re reading this, you know that I live in a Microsoft centric world,and although it would have been politically expedient of me to use a Windows Mobile device,I was never impressed with them. I was never tempted by the iPhone, which I regard as more of a toy than anything else. I was beginning to become interested in the Android, but remained leery from a reliability standpoint.

I was however becoming increasingly frustrated with the performance of the BlackBerry, particularly when it came to consuming web content, which was increasingly becoming a requirement. Web content was also very hard on the battery, and when travelling, I was lucky to get 8 hours without a charge. Another big cloud of doubt to me was the relevance of BES (Blackberry Enterprise Server) in a world of Exchange ActiveSync. It just seemed like way too much overhead and licensing to support mail/contact/calendar sync.

Everything changed when I heard about the Windows Phone 7 this past spring. Finally, Microsoft would have a product that not only competed, but in my opinion leapfrogged the competition. In my opinion, RIM wasn’t doing anything particularly innovative, so I resolved to try it out when it became available.

My biggest concern is that the vision that was spelled out in the original announcements wouldn’t be realized, or would be in some way compromised (we’ve seen this before from our friends in Redmond). I was thrilled to find that this wasn’t the case.

I received my Samsung Focus 2 1/2 weeks ago. I removed the SIM card from my Blackberry, put it in my Focus, and the Blackberry (a curve) hasn’t been turned on since. The first thing that I was asked was my Windows Live ID, and it immediately started to fill up with contacts and pictures from Facebook and Windows Live. A quick configure of 2 Exchange accounts (one on BPOS and one on premise) and everything was centralized nicely.

I have had precisely no problems with it in the past 2 weeks. Most interestingly to me, is that I’ve experienced no dropped calls in that period. My running joke was always that it wasn’t a mobile call unless it got dropped at least one. I always blamed the carrier, but I’m using the same SIM! It’s anecdotal, but the phone itself is at least good.

Working with office apps is very very slick. I particularly like the way that it works with OneNote content in the cloud (on Windows SkyDrive). In fact, the phone itself is a really nice demonstration of the overall benefits of cloud computing, in particular device independence. Combining the phone, the PC, and the new EXOPC slate that I recently acquired, makes for a pretty slick demonstration.

It’s not perfect – I have yet to be able to get the Office hub to talk to SharePoint, something pretty important to me…. but it does render nicely in the browser.

Reliability is of course something of a question mark yet. I have managed to drop it twice with no ill effects, and I’m not really anxious to put it to the test. I am however pretty hard on stuff, and if it’s fragile, you’ll likely hear it here first.

I just find myself pleasantly surprised by the way it works as I discover them, and that’s nice. It’s also pretty nice having something from Microsoft that’s pretty much the coolest thing in its space. At least for now. A big tip of the hat to the designers from here.

I don’t leave the Blackberry angry… it’s served me very very well over the years, but we appear to have gone our separate ways, and I wish it well. Given that I live in RIM’s back yard, it really is too bad, but I have made my choice, and I’m very, very happy with it.

BPOS is now Office 365

Microsoft announced the branding for the next version of BPOS today – the new name is Office 365.

We’ll see it early next year, but we already have a pretty good idea of what will be there. All of the constituent products (SharePoint, Exchange, LiveMeeting and Office Communication Server, now Lync) will be brought up to their most recent versions, and the Office Web Applications will be added in. In light of the changes, and the expected change in focus to the Office Web Apps, the new name makes a lot of sense. I’m just glad that I don’t have to call it BPOS anymore…